|
FAST HIGH VOLTAGE SOLID-STATE SWITCHES |
|
C7 |
Variable On-Time, Thyristor / MCT▶ |
|
●
Versatile switching elements with true relay character
● On-time controllable
by TTL signal |
|
Model [sorted by |
Description / Comment |
Dimensions |
Voltage |
Pk. Current |
Peak Power |
On-Time |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
○ X |
Limited quantity - not for OEM applications! |
89 x 64 x 31 |
4 |
3000 |
12 |
1…∞ |
|
|
|
|
|
--------------- |
|
|
|
|
|
○ X |
Limited quantity - not for OEM applications! |
116 x 64 x 31 |
8 |
3000 |
24 |
1…∞ |
|
|
|
|
|
--------------- |
|
|
|
|
|
○ X |
Limited quantity - not for OEM applications! |
178 x 64 x 31 |
10 |
3000 |
30 |
1…∞ |
|
|
○ X |
Limited quantity - not for OEM applications! |
178 x 64 x 31 |
12 |
3000 |
36 |
1…∞ |
|
|
○ X |
Limited quantity - not for OEM applications! |
178 x 64 x 31 |
15 |
3000 |
45 |
1…∞ |
|
|
○ X |
Limited quantity - not for OEM applications! |
178 x 64 x 31 |
18 |
3000 |
54 |
1…∞ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Option(1) |
Description |
|
|
|
|
HFB |
High Frequency Burst: Improved burst capability of driver by means of external buffer capacitors. Recommended if more than 10 pulses with less than 10 μs spacing are generated. |
|
HFS |
High Frequency Switching: External supply of auxiliary driver voltage (50-350 VDC according to type). Necessary if the specified “Maximum Operating Frequency” shall be exceeded. (2) |
|
LP |
Low Pass: Low pass filter at the control input. Propagation delay time will be increased by ~50 ns. Jitter + 500 ps. Improved noise immunity and less critical wiring in high speed applications. (3) |
|
MIN-ON |
Minimum On-Time: Individually increased Minimum On-Time to ensure a minimum on duration indepently of control signal. For safety relevant circuits. |
|
MIN-OFF |
Minimum Off-Time: Individually increased Minimum Off-Time to ensure a minimum off duration indepently of control signal. For safety relevant circuits. |
|
ST |
Stage Tapping: Connectors at the individual stages of stack in order to utilize single power semiconductors. To achieve fast rise times also at very low operating voltages (<0.01xVo). |
|
LN |
Low Noise: Internal power driver modified for zero noise emission for a specific period of time. Relevant in conjunction with extremely sensitive detector amplifiers (e.g. SEV/MCP applications) only. (2) |
|
ISO-25 |
25 kV Isolation: Isolation Voltage increased to 25 kVDC. Housing dimensions may change for some models. |
|
ISO-40 |
40 kV Isolation: Isolation Voltage increased to 40 kVDC. Housing dimensions may change for some models. Only in connection with option PT-HV. |
|
ISO-80 |
80 kV Isolation: Isolation Voltage increased to 80 kVDC. Housing dimensions may change for some models. Only in connection with option PT-HV. |
|
ISO-120 |
120 kV Isolation: Isolation Voltage increased to 120 kVDC. Housing dimensions may change for some models. Only in connection with option PT-HV. |
|
PL |
Passive Lock: Special inhibit function for two single switches in fast push-pull circuits. The input of the passive switch will be locked by the activated switch to avoid turn-on by noise. |
|
I-PC |
Integrated Part Components: Integration of small part components according to customer’s specifications (e.g. buffer capacitors, snubbers, damping resistors, diodes, opto couplers). (2) |
|
I-FWD |
Integrated Free-Wheeling Diode: Built-in parallel diode with short recovery time. In connection with inductive load only. |
|
I-FWDN |
Integrated Free-Wheeling Diode Network: Built-in parallel diode plus serial blocking diode with short recovery time. In connection with inductive load only. |
|
SPT-C |
Shielded Pigtail for Control Connection: Cable (l=300mm, Z=100Ω) with LEMO plug+socket and 100Ω termination. Improved noise immunity in case of long distance to driver circuits. (3)(4) |
|
PT-C |
Pigtail for Control Connection: Flexible leads (l=75 mm) with PCB connector. This option is only relevant for switching modules with pins. Recommended for modules with options CF & GCF. |
|
PIN-C |
Pins for Control Connection: Gold plated pins for printed circuit board designs (special sockets available). This option is only relevant for switching modules which have pigtails as standard. |
|
PT-HV |
Pigtails for HV Connection: Flexible leads with cable lugs. For increased creepage. PT-HV is standard for all types with >25 kV switching voltage. Not recommended in extremely fast circuits. |
|
ST-HV |
Screw Terminals for HV Connection: Threaded inserts at the bottom of module (if not standard). For PCB design. Operation above 25 kV requires liquid insulation (Galden®/Oil) or potting. |
|
UL94 |
Flame Retardant Casting Resin: Casting resin according to UL-94-VO. Minimum order quantity required. (2) |
|
TH |
Tubular Housing: Tubular instead of rectangular housing. Adaption to specific ambient conditions or in case of difficult assembly situations. (2) |
|
FC |
Flat Case: Height of standard plastic housings reduced to 19 mm or less. Not in combination with cooling options CF, GCF and DLC. |
|
ITC |
Increased Thermal Conductivity: Special moulding process to increase the thermal conductivity of the module. Pd(max) will be increased by approx. 20-30%. (2) |
|
CF |
Non-Isolated Cooling Fins: Standard sizes in categories I to VII according to model. Nickel plated copper 0.5 mm, fin height 35 mm. For air and liquid cooling (e.g. Galden® or oil). |
|
CF-1 |
Non-Isolated Cooling Fins d=1mm: Nickel plated copper 1.0 mm instead of 0.5 mm. The Max. Power Dissipation will be increased by ~80 %. For air and liquid cooling (e.g. Galden® or oil). |
|
CF-X2 |
Non-Isolated Cooling Fins enlarged by x2: Fin area enlarged by factor 2. Not relevant in connection with liquid cooling. |
|
CF-X3 |
Non-Isolated Cooling Fins enlarged by x3: Fin area enlarged by factor 3. Not relevant in connection with liquid cooling and forced air convection. |
|
CF-CS |
Non-Isolated Cooling Fins with customized shape: Individual shape to meet specific OEM requirements. (2) |
|
CF-LC |
Non-isolated Cooling Fins optimized for liquid cooling: Double fins, nickel plated copper, 0.5 mm thickness, height 20 mm. |
|
CF-DR |
Cooling Fin for Driver: Small extra cooling fin for the control electronics. On ground potential. Can be necessary in combination with HFS. (2) |
|
GCF |
Grounded Cooling Flange: Nickel-plated copper flange for High Power applications. Max. isolation voltage 40kV. Increased coupling capacitance CC. In combination with option SPT-C only. |
|
GCF-X2 |
Grounded Cooling Flange, Max. Continuous Power Dissipation increased by x2: Thermal resistance “Switch to Flange” reduced for twice the power capability. (2) |
|
GCF-W |
Water Cooler for Grounded Cooling Flange: Flat water cooling plate attached to the grounded cooling flange GCF. With water inlet and outlet. |
|
DLC |
Direct Liquid Cooling: Internal liquid channel in direct contact with the power semiconductors. Very compact cooling solution for medium power. Galden® and non-conductive liquids only. (2) |
|
HI-REL |
High Reliability / MIL Versions: Available on request. (2) |
|
|
|
|
(1) New option code: Data
sheets may differ from this coding system (especially older ones) and
do not indicate all possible options as per above table. (2) Please
consult factory for detailed information. |
|
|
|
|
|
Further information, data sheets and drawings are available on request. All data and specifications subject to change without notice. BEHLKE POWER ELECTRONICS GmbH June 2009 |
|